HDMI Switcher (E4U-222) (Start From 5 Units)

Specification:

• Switch easily between any two HDMI sources automatically.
• Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p, 2k, 1440p graphics and computer resolutions up to 1920 x 1200 are easily achieved
• No external power needed.
• Up to 24 bit colour depth.
• Up to DTS Master Audio and Dolby Digital TrueHD support
• HDMI pass-through
• HDCP pass-through
• Compatible with HDMI1.3 devices.
• Connect and operate

1. Turn off the TV set and HDMI devices. Connect the HDMI cable from input source into HSW0201 and output to TV set. (Input cables are optional)
2. Please refer to connection diagram section.
3. Turn on the output devices and TV set.
4. When you display the Input 1 signal, you don't need to care the state of the device in Input 2. When you use the Input 2, you have to switch off the power of the device in Input 1.
5. For too long HDMI cable (over 5meters), it is recommended to give a 5Vdc power supply (optional) to the HDMI switcher unit.

• Attention: Insert / Extract cable gently.
• Operating temperature range -5 to 35¡Í (-41 to 95Éò)
• Operating humidity range: 5 to 90 % RH (no condensation)
• Video Amplifier Bandwidth: 140 MHz
• Input Video Signal: 0.5-1.0 volts p-p
• Input DDC Signal: 5 volts p-p (TTL)
• Maximum Single Link Range: 1280 x 1024, 1080P
• Video format supported:
• VGA : 640x480,800x600,1024x768,1280x1024
• DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080P
• Output Video: HDMI1.3+HDCP1.0/1.1
• Vertical Frequency Range: 60Hz
• Power Consumption: 10 Watts (max.)
• Power Supply: 5VDC (optional)
• Dimensions: 85mmW x 15mmH x 43mmD
• Weight: 80gs
• Package includes:

1. 2x1 HDMI Switcher
2. User's Manual